FFA-A9 / RZAG-MY1

Product Features

Fully flat integration in standard architectural ceiling tiles, leaving only 8mm
Top efficiency: - Energy labels up to A++ in both cooling and heating - compressor offers substantial efficiency improvements
Choosing for an R-32 product, reduces the environmental impact with 68% compared to R-410A, leads directly to lower energy consumption thanks to its high energy efficiency and has a lower refrigerant charge
Remarkable blend of iconic design and engineering excellence with an elegant finish in white or a combination of silver and white
The perfect balance in efficiency and comfort thanks to Variable Refrigerant Temperature: top seasonal efficiency throughout most of the year and quick reaction speed on the hottest days.
Combining with R-32 Bluevolution technology, reduces environmental impact with 68% compared to R-410A, leads directly to lower energy consumption thanks to its high energy efficiency and has up to lower 16% refrigerant charge
Suits high sensible, infrastructure cooling applications
Replace existing systems with R-32 technology without needing to replace the piping
Two optional intelligent sensors improve energy efficiency and comfort
Individual flap control: flexibility to suit every room layout without changing the location of the unit!
Unified indoor unit range for R-32 and R-410A
Guarantees operation in both heating and cooling mode down to -20°C
Reduced energy consumption thanks to specially developed small tube heat exchanger, DC fan motor and drain pump
Refrigerant cooled PCB guarantees reliable cooling, as it is not influenced by ambient temperature.
Maximum piping length up to 85m
Optional fresh air intake
Branch duct discharge allows to optimize air distribution in irregular shaped rooms or to supply air to small adjacent rooms
Outdoor units for pair, twin, triple, double twin application
Standard drain pump with 630mm lift increases flexibility and installation speed

Benefits

Inverter

Inverter compressors continuously adjust compressor speed to actual demand. Fewer power-consuming starts and stops result in decreased energy consumption (up to 30%) and more stable temperatures.
Home leave operation

Maintains the indoor temperature at your specified comfort level during absence, thus saving energy
Draught prevention

When starting to warm up or when the thermostat is off, the air discharge direction is set horizontally and the fan to low speed, to prevent draught. After warming up, air discharge and fan speed are set as desired.
Auto cooling-heating changeover

Automatically selects heating or cooling mode to achieve the set temperature.
Infrastructure cooling

Remove in a reliable, efficient and flexible way the heat constantly generated by the IT and server equipment to ensure maximum uptime while offering the best return on investment.
Presence & floor sensor (optional)

The presence sensor directs the air away from any person detected in the room, when the air flow control is on. The floor sensor detects the average floor temperature and ensures an even temperature distribution between ceiling and floor.

Individual flap control

Individual flap control via the wired remote controller enables you to easily fix the position of each flap individually, to suit any new room configuration. Optional closure kits are available as well.
Daikin Residential Controller (optional) (optional)

Control your indoor climate from any location via smartphone or tablet
Fan only

The unit can be used as fan, blowing air without heating or cooling.
Whisper quiet

Daikin indoor units are whisper quiet. Also the outdoor units are guaranteed not to disturb the quiet of the neighbourhood.
Ceiling soiling prevention

Prevents air from blowing out too long in horizontal position, to prevent ceiling stains.
Vertical auto swing

Possibility to select automatic vertical moving of the air discharge flaps for efficient air and temperature distribution throughout the room.
Fan speed steps (3 steps)

Allows to select up to the given number of fan speed.
Dry programme

Allows humidity levels to be reduced without variations in room temperature.
Air filter

Removes airborne dust particles to ensure a steady supply of clean air.
Weekly timer

Can be set to start heating or cooling anytime on a daily or weekly basis.
Infrared remote control (optional)

Starts, stops and regulates the air conditioner from a distance.
Wired remote control (optional)

Starts, stops and regulates the air conditioner.
Centralised control (optional)

Starts, stops and regulates several air conditioners from one central point.
Auto-restart

The unit restarts automatically at the original settings after power failure.
Self diagnosis

Simplifies maintenance by indicating system faults or operating anomalies.
Drain pump kit (standard)

Facilitates condensation draining from the indoor unit.
Twin/triple/double twin application

2,3 or 4 indoor units can be connected to only a single outdoor unit even if they have different capacities. All indoor units operate within the same heating or cooling mode from one remote control.
Multi model application

Up to 5 indoor units can be connected to a single outdoor unit, even if they have different capacities. All indoor units can individually be operated within the same heating or cooling mode.
VRV for residential application

Up to 9 indoor units (even different capacities and up to 71 class) can be connected to a single outdoor unit. All indoor units can individually be operated within the same mode.